The forum is locked.
The Ocean Color Forum has transitioned over to the Earthdata Forum (https://forum.earthdata.nasa.gov/). The information existing below will be retained for historical reference. Please sign into the Earthdata Forum for active user support.
What does it mean the absorbance value 5,7767 for a, adg and/or aph products? It looks like an error or some kind of light supersaturation over the sensor.
If you check the l2_flags for the pixels set to 5.7767, you'll probably find that the PRODFAIL flag is set.
These are bad values (in that the algorithm encountered a failure condition) and should be ignored.
Sean
These are bad values (in that the algorithm encountered a failure condition) and should be ignored.
Sean
Thank you, Sean. I understand that, but may this value represent some kind of supersaturation of the sensor? I've noted that this value usually takes place at points which image color is dark red.
If that were the case the HILT flag would be set. PRODFAIL simply means one (or more) of the products produced for that pixel
encountered an algortihm failure condition.
Sean
encountered an algortihm failure condition.
Sean