|
ocssw
V2022
|
mapattr.h File Reference
This graph shows which files directly or indirectly include this file:
Go to the source code of this file.
Macros | |
| #define | L3M_PNAME "Product Name" |
| #define | L3M_TITLE "Title" |
| #define | L3M_TITLE_VAL "SeaWiFS Level-3 Standard Mapped Image" |
| #define | L3M_DCENTER "Data Center" |
| #define | L3M_DCENTER_VAL "NASA/GSFC SeaWiFS Data Processing Center" |
| #define | L3M_STATION "Station Name" |
| #define | L3M_STATION_VAL "Wallops Flight Facility" |
| #define | L3M_STLAT "Station Latitude" |
| #define | L3M_STLAT_VAL 37.9272 |
| #define | L3M_STLON "Station Longitude" |
| #define | L3M_STLON_VAL -75.4753f |
| #define | L3M_MISSION "Mission" |
| #define | L3M_MISSION_VAL "SeaStar SeaWiFS" |
| #define | L3M_MSNCHAR "Mission Characteristics" |
| #define | L3M_MSNCHAR_VAL "Nominal orbit: inclination = 98.2 (Sun-synchronous); node = 12 noon local (descending); eccentricity = <0.002; altitude = 705 km; ground speed = 6.75 km/sec" |
| #define | L3M_SENSOR "Sensor" |
| #define | L3M_SENSOR_NAME "Sensor Name" |
| #define | L3M_SENSOR_VAL "Sea-viewing Wide Field-of-view Sensor (SeaWiFS)" |
| #define | L3M_SNSCHAR "Sensor Characteristics" |
| #define | L3M_SNSCHAR_VAL "Number of bands = 8; number of active bands = 8; wavelengths per band (nm) = 412, 443, 490, 510, 555, 670, 765, 865; bits per pixel = 10; instantaneous field-of-view = 1.5835 mrad; pixels per scan = 1285; scan rate = 6/sec; sample rate = 7710/sec" |
| #define | L3M_PRODTYPE "Product Type" |
| #define | L3M_PVERSION "Processing Version" |
| #define | L3M_REPLACE "Replacement Flag" |
| #define | L3M_SOFTID "Software ID" |
| #define | L3M_SOFTNM "Software Name" |
| #define | L3M_SOFTVER "Software Version" |
| #define | L3M_PTIME "Processing Time" |
| #define | L3M_INFILES "Input Files" |
| #define | L3M_PROCCON "Processing Control" |
| #define | L3M_PROCLOG "Processing Log" |
| #define | L3M_INPARMS "Input Parameters" |
| #define | L3M_FLAG_NAMES "L2 Flag Names" |
| #define | L3M_FLAG_USE "L2 Flag Usage" |
| #define | L3M_ENG_Q_USE "L2 Engineering Quality Usage" |
| #define | L3M_PSYEAR "Period Start Year" |
| #define | L3M_PSDAY "Period Start Day" |
| #define | L3M_PEYEAR "Period End Year" |
| #define | L3M_PEDAY "Period End Day" |
| #define | L3M_STIME "Start Time" |
| #define | L3M_ETIME "End Time" |
| #define | L3M_SYEAR "Start Year" |
| #define | L3M_SDAY "Start Day" |
| #define | L3M_SMSEC "Start Millisec" |
| #define | L3M_EYEAR "End Year" |
| #define | L3M_EDAY "End Day" |
| #define | L3M_EMSEC "End Millisec" |
| #define | L3M_ORBIT "Orbit" |
| #define | L3M_SORBIT "Start Orbit" |
| #define | L3M_EORBIT "End Orbit" |
| #define | L3M_MAPPROJ "Map Projection" |
| #define | L3M_MAPPROJ_VAL "Equidistant Cylindrical" |
| #define | L3M_LATUNITS "Latitude Units" |
| #define | L3M_LATUNITS_VAL "degrees North" |
| #define | L3M_LONUNITS "Longitude Units" |
| #define | L3M_LONUNITS_VAL "degrees East" |
| #define | L3M_NLAT "Northernmost Latitude" |
| #define | L3M_NLAT_VAL 90.0 |
| #define | L3M_SLAT "Southernmost Latitude" |
| #define | L3M_SLAT_VAL -90.0 |
| #define | L3M_WLON "Westernmost Longitude" |
| #define | L3M_WLON_VAL -180.0 |
| #define | L3M_ELON "Easternmost Longitude" |
| #define | L3M_ELON_VAL 180.0 |
| #define | L3M_LAT_STEP "Latitude Step" |
| #define | L3M_LON_STEP "Longitude Step" |
| #define | L3M_SWLAT "SW Point Latitude" |
| #define | L3M_SWLON "SW Point Longitude" |
| #define | SDS_NAME "l3m_data" |
| #define | LONGNAME "long_name" |
| #define | LONGNAME_VAL "Level 3 Standard Mapped Image Data" |
| #define | L3M_DATABINS "Data Bins" |
| #define | L3M_NROWS "Number of Lines" |
| #define | L3M_NCOLS "Number of Columns" |
| #define | L3M_MEASURE "Measure" |
| #define | L3M_PARAMETER "Parameter" |
| #define | L3M_UNITS "Units" |
| #define | L3M_SCALING "Scaling" |
| #define | L3M_LOG_SCALE "logarithmic" |
| #define | L3M_LINEAR_SCALE "linear" |
| #define | L3M_SC_EQN "Scaling Equation" |
| #define | L3M_LOG_EQN "Base**((Slope*l3m_data) + Intercept) = Parameter value" |
| #define | L3M_LINEAR_EQN "(Slope*l3m_data) + Intercept = Parameter value" |
| #define | L3M_BASE "Base" |
| #define | L3M_SLOPE "Slope" |
| #define | L3M_INTERCEPT "Intercept" |
| #define | L3M_MIN "Data Minimum" |
| #define | L3M_MAX "Data Maximum" |
Macro Definition Documentation
◆ L3M_BASE
◆ L3M_DATABINS
◆ L3M_DCENTER
◆ L3M_DCENTER_VAL
◆ L3M_EDAY
◆ L3M_ELON
◆ L3M_ELON_VAL
◆ L3M_EMSEC
◆ L3M_ENG_Q_USE
◆ L3M_EORBIT
◆ L3M_ETIME
◆ L3M_EYEAR
◆ L3M_FLAG_NAMES
◆ L3M_FLAG_USE
◆ L3M_INFILES
◆ L3M_INPARMS
◆ L3M_INTERCEPT
◆ L3M_LAT_STEP
◆ L3M_LATUNITS
◆ L3M_LATUNITS_VAL
◆ L3M_LINEAR_EQN
| #define L3M_LINEAR_EQN "(Slope*l3m_data) + Intercept = Parameter value" |
◆ L3M_LINEAR_SCALE
◆ L3M_LOG_EQN
| #define L3M_LOG_EQN "Base**((Slope*l3m_data) + Intercept) = Parameter value" |
◆ L3M_LOG_SCALE
◆ L3M_LON_STEP
◆ L3M_LONUNITS
◆ L3M_LONUNITS_VAL
◆ L3M_MAPPROJ
◆ L3M_MAPPROJ_VAL
◆ L3M_MAX
◆ L3M_MEASURE
◆ L3M_MIN
◆ L3M_MISSION
◆ L3M_MISSION_VAL
◆ L3M_MSNCHAR
◆ L3M_MSNCHAR_VAL
| #define L3M_MSNCHAR_VAL "Nominal orbit: inclination = 98.2 (Sun-synchronous); node = 12 noon local (descending); eccentricity = <0.002; altitude = 705 km; ground speed = 6.75 km/sec" |
◆ L3M_NCOLS
◆ L3M_NLAT
◆ L3M_NLAT_VAL
◆ L3M_NROWS
◆ L3M_ORBIT
◆ L3M_PARAMETER
◆ L3M_PEDAY
◆ L3M_PEYEAR
◆ L3M_PNAME
◆ L3M_PROCCON
◆ L3M_PROCLOG
◆ L3M_PRODTYPE
◆ L3M_PSDAY
◆ L3M_PSYEAR
◆ L3M_PTIME
◆ L3M_PVERSION
◆ L3M_REPLACE
◆ L3M_SC_EQN
◆ L3M_SCALING
◆ L3M_SDAY
◆ L3M_SENSOR
◆ L3M_SENSOR_NAME
◆ L3M_SENSOR_VAL
| #define L3M_SENSOR_VAL "Sea-viewing Wide Field-of-view Sensor (SeaWiFS)" |
◆ L3M_SLAT
◆ L3M_SLAT_VAL
◆ L3M_SLOPE
◆ L3M_SMSEC
◆ L3M_SNSCHAR
◆ L3M_SNSCHAR_VAL
◆ L3M_SOFTID
◆ L3M_SOFTNM
◆ L3M_SOFTVER
◆ L3M_SORBIT
◆ L3M_STATION
◆ L3M_STATION_VAL
◆ L3M_STIME
◆ L3M_STLAT
◆ L3M_STLAT_VAL
◆ L3M_STLON
◆ L3M_STLON_VAL
◆ L3M_SWLAT
◆ L3M_SWLON
◆ L3M_SYEAR
◆ L3M_TITLE
◆ L3M_TITLE_VAL
| #define L3M_TITLE_VAL "SeaWiFS Level-3 Standard Mapped Image" |
